TABLE OF CONTENTS Table of Contents 1 INSTRUCTION MANUAL Perma Pure LLC Integrator Series Model iCOOL
Section F: LED Indicators 10 F: LED INDICATORS The ICOOL has one green and one red LED operating indicators. These indicators are arranged horizo
Section H: Test & Adjustment Procedures 11 G: I/O TERMINAL BLOCK DESCRIPTION The I/O terminal blocks are found on the bottom back of the coole
Section H: Test & Adjustment Procedures 12 H: TEST & ADJUSTMENT PROCEDURES NOTE: All test and adjustment procedures have been performed at
Section H: Test & Adjustment Procedures 13 Ready Set Point The ready set point is the temperature the unit will turn on the output relay. The
14 For further service assistance, contact: Perma Pure LLC 8 Executive Drive Toms River, NJ 08755 Tel: 800-337-3762 (toll free U.S.) Tel: 732-24
TABLE OF CONTENTS Table of Contents 2 A: Specifications ...
Section A: Specifications 3 A: SPECIFICATIONS Physical Description Single Channel System 1 x 5” Heat Exchanger 1 Active (cooled to 3.5C) Hea
Section B: Limited Warranty 4 B: LIMITED WARRANTY Perma Pure LLC WARRANTY and DISCLAIMERS Perma Pure (Seller) warrants that product supplied here
Section C: Principle of Operation 5 C: PRINCIPLE OF OPERATION Thank you for purchasing the Perma Pure Integrator Series Thermo-Electric Coo
Section C: Principle of Operation 6 Figure 2: Heat Exchanger, Impinger and Heat Sink Assembly proportional to the current and the number of
Section C: Principle of Operation 7 lowers the sample dew point below 4o C (39.2°F). As the gas cools and the moisture vapor condenses, th
Section D: Installation 8 D: INSTALLATION The Model ICOOL should be installed away from heat sources in a well ventilated area of an instrument ra
Section E: Start-up Procedure 9 E: START-UP PROCEDURE Plug in the power cord to a properly grounded main circuit. The Ready Green LED will come o
Commentaires sur ces manuels